I just replaced the toner cartridge and the lcd continues to display the message "toner low" / "replace toner" / "toner ended" or the toner led is still on or flashing.. "check cable", "check connection", or "connecting to pc" when scanning - usb - macintosh 1. turn off your machine, wait about 15 seconds, and then turn on your machine.. Dear brother support, i can't get my brother mfc-490cw printer to print or scan at all! every time i say print, it gives the message printer off-line. i have checked the printer setting and this print ….
Brother printer is not listed, the driver may not be installed properly. go to part 8 to reinstall the if the brother printer is set as the default printer, it will have a check mark in front of the icon. to set your brother machine as the default printer, right click on the mfc9840cdw windows network connection repair instructions. Step 2: check the connection to use the network scanning feature, you need to configure your brother machine in the peer-to-peer network environment. in a network shared environment, the scanning feature works from a server pc, but does not work from client pcs.. I forgot to mention that you should always set a static ip on the printer, and remember to go into the properties of the printer in windows and ensure the port is the same ip. then everything should be hunky dory..
